COMPARE(0) INQUIRY
EverFocus Electronics Corp.
Home/Products/AMR/NSync/

AMR

EAV-30N(AMRC-ORN) (Preliminary Release)

Based on Nvidia Orin NX SOM Module Robot Controller
Features:

• Base on NVIDIA Jetson Orin NX 8G/16G DDR SOM module
• Provide M.2 M key 2280 slot with PCIe Gen3 x4 signal
• M12 X-coded Gigabit Ethernet port x 3
• CAN FD interface with isolation feature x 2
• Provide 7-channel Time sync output for external sensor
• GMSL2 camera FAKRA Z code interface with frame sync x 4
• HMTD Base-T1 Ethernet port for solid states 3D LiDAR x 4/8,Radar, and camera
Print
  • Processor NVIDIA Jetson Orin NX 8G/16G DDR SOM module
    GPU capacity ONX16GB: 1024 NVIDIA CUDA cores, 32 Tensor cores, 918MHz ONX 8GB: 1024 NVIDIA CUDA cores, 32 Tensor cores, 765MHz
    CPU ONX 16GB: Eight-core Cortex A78AE ARMv8.2, 64-bit ONX 8GB: Six-core Cortex A78AE ARMv8.2, 64-bit
    AI Performance ONX 16GB: Up to 100(Sparse) INT8 TOPs and 50(Dense) INT8 TOPs ONX 8GB: Up to 70(Sparse) INT8 TOPs and 35(Dense) INT8 TOPs
    Deep Learning Acceleration ONX 16G: 2x NVDLA, maximum frequency up to 614MHz, 20 TOPs (Sparse INT8) ONX 8G: 1x NVDLA, maximum frequency up to 610MHz, 20 TOPs (Sparse INT8)
    Internal Memory NX 16GB: 16GB 128-bit LPDDR5 DRAM, 102GB/s ONX 8GB: 8GB 128-bit LPDDR5 DRAM, 102GB/s
    M12X Coded M12 X-coded GbE Ethernet ports x 3
    HDMI interface HDMI 2.0a/b x 1
    USB Port USB 3.2 Gen1 type A x 4
    ANT 1/2 FAKRA C code connector for Wi-Fi x 2
    48pin CMC lockable connector Multi-channel interface for robotic: 4pin 9-36VDC ignition power input, 1x ACC trigger input for power on Microphone input x1, Speaker output with 10W amplifier x1 PWM GPIO, 2x CAN H/L interface with isolation x3 FAN control output x 1, RS232(TXD/RXD/CTS/RTS) x 1 1x Recovery, 1x Reset, 1x PWR_BTN
    32pin CMC lockable connector PPS + ToD syncout for external sensor x7 12V/3.5A Power output for external sensor x2
    FAKRA Z code (left side) GMSL 2 camera FAKRA Z code interface with frame sync x 4
    GSM radio 1/2/3 Max. FAKRA D coded connector for 4G/5G x 3
    HMTD 1/2 1G Base-T1 Ethernet ports x 8
    OTG USB micro-USB for recovery BSP x 1
    Ignition Feature Power on delay: 10 sec (default) Power off delay: 3 min (default)
    Input power range 9-36Vdc± 5%
    Power consumption 100W (full loading) ONX 8G/16G SOM module: default 20W Thermal dissipation: Passive (default), Active (Optional)
    Enclosure IP40 design, Aluminum
    Dimension (mm) 186 x 140 x 86mm (7.32 x 5.51 x 3.385 inch)
    Mounting / Installation Wall mount
    Operating Temperature -20°C to 60°C (-4°F to 140°F)
    Operating Humidity Approx. 95% @40 (non-condensing)
    Storage Temperature -40 to 85°C (-40°F to 185°F)
    Vibration IEC 60068-2-64: 5Grms, 5-500Hz, 3 axes
    Shock Operating: 3G, half sine, 11ms duration
    EMI CE (EN 55032, EN 55035) & FCC class A (ANSI C63.4, 4a)
    EMS (TBC) IEC 61000-4-2 ESD: ± 15kV Air, ± 8kV contact IEC 61000-4-3 RS: 80M~1000MHz, 3V/m(rms), 80% AM (1kHz) IEC 61000-4-4 EFT: Power port ± 1KV, Data port ± 0.5kV IEC 61000-4-5 Surge: Power port L-L ± 1kV, L-G ± 4kV, Data port ± 4kV IEC 61000-4-6 CS: 0.15M~10MHz 3Vrms, 10M~30MHz 3-1Vrms, 30M~80M 1Vrms 80% AM 1kHz IEC 61000-4-8 PFMF: 50/60Hz, 1A/m
    Warranty 2 years
Use of cookies.
We use cookies to provide you with better user experience. Cookies settings can be controlled and configured in your web browser at any time.
By using the site you agree to us using cookies. To continue viewing and using the website click on “I accept”.

EverFocus © Copyright All Rights Reserved.